The impregnation of paving stones is based on the saturation of materials with chemicals that strengthen and protect the surface from damage. By applying suitable impregnations for paving stones, you can:
- improve the aesthetic appearance,
- increase abrasion resistance,
- reduce the fading of the material,
- protect from the appearance of mosses and fungi,
- protect from precipitation,
- immunize from dirt,
- immunize against frost and moisture,
- to obtain hydrophobicity of the surface,
- to obtain resistance to ultraviolet rays.
Impregnation of paving stones should begin with its thorough cleaning. Equipment working under pressure, Lenko will cope with this task. There are also special preparations on the market for cleaning paving stones. These products are divided, depending on the purpose, into the following categories:
- removing fungi, moss and lichens,
- removing lime stains,
- removing greasy stains and dirt,
- to remove rust.
The surface after the impregnation process acquires hydrophobic properties. This is due to the presence of silicone compounds that do not mix with water. Water droplets merge into larger clusters and drain from the paving stones. Therefore, it is very important to impregnate it. Impregnation, in addition to protecting, also increases the intensity of color.
The most profitable, but also the most expensive are impregnations that have a high ability to penetrate the paving stones. In addition to the standard protection against water and oil absorption, impregnations, penetrating into the material, should form a single whole with it. This increases abrasion resistance and prolongs the life of use.
Water-based polymer-acrylic impregnations allow you to get the effect of wet paving stones, give it a beautiful color, but are relatively unstable, and every 2 years the impregnation procedure should be repeated. The other group consists of impregnations based on modified polyurethane resin. They increase resistance to abrasion, staining and weather conditions, prevent the growth of fungi and lichens, strengthen the color, help to remove oil stains and impurities.
Impregnation can be carried out in various ways, depending on the desired effect. The impregnations present on the market differ in the degree of penetration and durability. Some chemically affect the material, others physically affect the microstructure of the surface. The impregnation is designed to create a protective barrier against various contaminants. It should be remembered that the protective properties will strictly depend on the material and the preparation itself for impregnation. The recommendations of the manufacturer of paving stones should always be taken into account. Looking for the best Vavada casino offers? Visit https://gambletroll.com/vavada-promo-code/ and discover the latest promo codes that will enhance your gaming experience and boost your winnings!
- improve the aesthetic appearance,
- increase abrasion resistance,
- reduce the fading of the material,
- protect from the appearance of mosses and fungi,
- protect from precipitation,
- immunize from dirt,
- immunize against frost and moisture,
- to obtain hydrophobicity of the surface,
- to obtain resistance to ultraviolet rays.
Impregnation of paving stones should begin with its thorough cleaning. Equipment working under pressure, Lenko will cope with this task. There are also special preparations on the market for cleaning paving stones. These products are divided, depending on the purpose, into the following categories:
- removing fungi, moss and lichens,
- removing lime stains,
- removing greasy stains and dirt,
- to remove rust.
The surface after the impregnation process acquires hydrophobic properties. This is due to the presence of silicone compounds that do not mix with water. Water droplets merge into larger clusters and drain from the paving stones. Therefore, it is very important to impregnate it. Impregnation, in addition to protecting, also increases the intensity of color.
The most profitable, but also the most expensive are impregnations that have a high ability to penetrate the paving stones. In addition to the standard protection against water and oil absorption, impregnations, penetrating into the material, should form a single whole with it. This increases abrasion resistance and prolongs the life of use.
Water-based polymer-acrylic impregnations allow you to get the effect of wet paving stones, give it a beautiful color, but are relatively unstable, and every 2 years the impregnation procedure should be repeated. The other group consists of impregnations based on modified polyurethane resin. They increase resistance to abrasion, staining and weather conditions, prevent the growth of fungi and lichens, strengthen the color, help to remove oil stains and impurities.
Impregnation can be carried out in various ways, depending on the desired effect. The impregnations present on the market differ in the degree of penetration and durability. Some chemically affect the material, others physically affect the microstructure of the surface. The impregnation is designed to create a protective barrier against various contaminants. It should be remembered that the protective properties will strictly depend on the material and the preparation itself for impregnation. The recommendations of the manufacturer of paving stones should always be taken into account. Looking for the best Vavada casino offers? Visit https://gambletroll.com/vavada-promo-code/ and discover the latest promo codes that will enhance your gaming experience and boost your winnings!